Customized Xingtai cement tank

Maintenance means no steam curing tank. After the cement pipe is made on the cement pipe making machine, it is not necessary to open the grinding tool. Put the cement pipe mold and cement pipe outdoors for regular maintenance. Generally, after the cement pipe is made, it takes one day to carry out outdoor maintenance. The grinding tool can be opened the next day. After the mold is made, it also needs to carry out 4-6 days of regular maintenance, and full-time personnel should spray water on the cement pipe three times a day, The time of sprinkling is usually once in the morning, once in the afternoon and once at noon. The purpose of sprinkling is to maintain the environmental humidity of the cement pipe so that the concrete can gradually coagulate itself. The frequency of sprinkling can also be increased and reduced according to the environmental humidity of seasonal changes in weather conditions. But of course, there are more cement pipe molds required for maintenance.

Customized Xingtai cement tank

4. Excavator shall excavate to an elevation of about 10cm at the bottom of the trench. The soil at the bottom of the reserved trench shall not be excavated, and then it shall be removed manually to trim the trench bottom. Manually clean the trench, carefully check whether the soil at the bottom of the trench is disturbed, and if there is any, handle it. 5. On both sides of the trench and 1m above the bottom of the trench, elevation piles shall be set symmetrically, and elevation nails of equal height shall be nailed on them. The center line of the pipe channel and the elevation of the elevation pile shall be re measured before the bottom of the trench is reached and the pouring is leveled. 6. The height of soil stacking on one side of the trench edge shall not be more than 2m, and the distance from the trench edge shall not be less than 1m. The protection of underground pipelines for trench construction shall be disclosed to the relevant departments first to clarify the basic location of underground facilities. If necessary, sample holes shall be excavated first to find out the exact location, which is conducive to construction, and to ensure the safety of various embedded pipelines. During construction, support and protection measures shall be taken for exposed pipelines. 7. After the installation and connection construction, it is necessary to conduct a water discharge test, carefully observe for a period of time to check whether there is water seepage and leakage, and timely repair the problems found.

Customized Xingtai cement tank

Temperature: for the solidified mortar layer or concrete component, if the cement pipe factory is often in high temperature and extreme heat conditions, there will be strength loss. This is because the calcium hydroxide in the cement stone will be separated under high temperature conditions. In addition, some aggregates will separate or expand in volume under high temperature conditions. Cement raw materials: when selecting cement, cement varieties with high strength, good durability, appropriate price and reliable quality should be selected. The cement varieties with special properties shall be selected according to the service conditions of cement pipes; It is an important condition to ensure the durability of cement pipes to select better sand and stone aggregates, and sand and stone aggregates with good quality and qualified technical conditions.

Customized Xingtai cement tank

Before application, be sure to check whether each part is normal, and ensure the safety factor of each rubber hose connection. With the continuous and sustainable development trend of cement pipes and the increasing number of applications, problems such as pipeline leakage of cement pipes due to design, production and manufacturing or lack of maintenance have arisen. This has seriously affected the product quality of cement pipes and threatened everyone's personal safety. Therefore, we must strictly inspect the cement pipes in the whole process of application, so that we can see what problems are likely to occur in the whole process of application of cement pipes.

Customized Xingtai cement tank

1、 Factors affecting the price fluctuation of reinforced concrete cement pipes. 1. The quality of materials used for cement pipes will affect the price of cement pipes: generally speaking, the price of cement pipes will be slightly higher than the market average price if the quality of raw materials used for cement pipes is high, while the price of cement pipes with ordinary quality will be slightly lower. 2. The manufacturing process of cement pipes will also affect the price of cement pipes: generally, different types of cement pipes adopt different manufacturing processes, some are complex and tedious, some are simple and take less time, so the prices of different cement pipes will be different.

Customized Xingtai cement tank

Bored cast-in-place pile has strong vitality because of its high bearing capacity and adaptability to complex geology. However, this pile type needs to deal with the mud pumped out during construction, which causes serious environmental pollution. It has been less used in urban construction at home and abroad, and its production cost is quite high, so it is relatively less used in general industrial and civil buildings. The advantages and disadvantages of precast concrete square piles have been described, which will not be repeated, but it is worth mentioning that its construction damage rate is very low, which is also one of the starting points for our development and production of prestressed hollow square piles; At the same time, because it is solid and has a large dead weight, cracks often appear on the pile body during construction, resulting in poor durability of the pile